CEPHE PROFİLLERİ

• 16 kg / m3 density EPS is produced from the insulation plate (TS-825 ÖNORM EN 13499)
• The coating of acrylic plaster on the plate is highly resistant to external conditions.
• Bonding strength minimum of 80 kPa is.
• Flexible and does not crack.
• The interaction with water, why, freezing and thawing, as the UV affected.
• Heat transmission coefficient (= 0.033 - 0,040 W / mK)
• Insulation value is high.
• Economical.
• Fire class B1 is.
• It is not harmful to human health and the environment.
• It does not absorb water.
• It is light, it does not put a burden on the building.
• Suitable for building physics, breathe.
• The application is very easy and practical.
• It can be painted with all kinds of non-solvent-based paints.
• Provides design options, decorate the building.
• Standard lengths of 2000 mm is produced, it can be produced in different lengths.
• TS 825 - according to the EN 13499 standard thermal insulation and thermal insulation adhesive plaster and brick, concrete and plaster surfaces is fixed to the surface by the bonding method.

Wall Cladding Specifications
• 16-18 kg / m3 density EPS is produced from the insulation plate (TS-825 ÖNORM EN 13499)
• The coating of acrylic plaster on the plate is highly resistant to external conditions.
• Bonding strength minimum of 80 kPa is.
• Flexible and does not crack.
• The interaction with water, why, freezing and thawing, as the UV affected.
• Heat transmission coefficient (= 0.033 - 0,040 W / mK)
• Insulation value is high.
• Economical.
• It provides up to 60% based on the shape and location of the thermal insulation structure.
• It pays for itself in 4 years in the fog.
• The system pays for itself within 4 years.
• It is not harmful to human health and the environment.
• It does not absorb water.
• Over time not lose its heat insulation properties.
• It is light, it does not impose a significant burden to the structure.
• Suitable for building physics, breathe.
• Edge does not create a thermal bridge because it is ridden.
• The application is very easy and practical application errors is less.
• It can be painted with all kinds of non-solvent-based paints.
• Provides design options, decorate the building.
• Jamba is compatible with any applicable on them.
• Standard lengths of 2000 mm is produced, it can be produced in different lengths.
• TS 825 - according to the EN 13499 standard thermal insulation and thermal insulation adhesive plaster and brick, concrete and plaster surfaces is fixed to the surface by the bonding method.

EPS
تم تجهيزه ونضجه بشكل بلوك في سماكة ملائمة للمواصفاتTS 7316 EN 13163 ولـ TS 825 بشهادة جودتها TSE , في وسط مغلق يتحقق استقرار الأبعاد. قوة مقاومة الحرائق ب1, لا يحتوي بداخله على مواد معاد تدويرها وبقية مواصفاته موجودة في الجدول ب1, الموسعة